How to clean the Beijing crystal mask coating machine?
Release time:
2020-12-11
Cleaning of Coated Blades: Wipe with a dry cloth after the equipment is heated. Cleaning of Roller Shafts: Wipe the stainless steel roller shafts with a clean dry cloth dipped in 75% alcohol. If glue is found on the surface, wipe with a dry cloth dipped in 1620 solvent/ethyl acetate solvent; glue on the surface of rubber roller shafts should not be treated with organic solvents to avoid damaging the rubber roller shafts, but should be removed using a strong adhesive curing glue.
How to clean the Beijing crystal mask coating machine?
Cleaning the coating knife head: Wipe with a dry cloth after the equipment is heated. Roller cleaning: Wipe the stainless steel roller with a clean dry cloth dipped in 75% alcohol. If glue is found on the surface, wipe with a dry cloth dipped in 1620 solvent/ethyl acetate solvent; the glue on the rubber roller surface should not be treated with organic solvents to avoid damaging the rubber roller, but should be removed with a strong adhesive curing glue.
Beijing crystal mask coating machineOuter surface; cleaning method: Wipe with a clean dry cloth dipped in 75% alcohol. Batch replacement cleaning: Clean the glue box and hose of the Beijing crystal mask coating machine (suitable for changing glue types and coating methods): Drain the original glue, add 2-3 kilograms of new glue, heat until completely melted, drain, then add new glue, and after completely melting, drain at least 1 kilogram before starting formal production.
Cleaning the coating knife head (suitable for changing glue types and coating methods): Wipe with a dry cloth after the equipment is heated. Roller at the coating composite position; wipe the surface dust with a clean dry cloth; if glue is found on the surface, do not treat with organic solvents to avoid damaging the rubber roller, but should be removed with a strong adhesive curing glue.
Cleaning the corona device: After power off, wipe with a clean dry cloth dipped in 75% alcohol. Non-fixed cycle cleaning of the Beijing crystal mask coating machine: When the coating method and glue type change, the coating head of the Beijing crystal mask coating machine should be cleaned. During cleaning, the coating head should be removed before the glue solidifies, and wiped clean with a dry cloth dipped in 1620 solvent. During production, when the equipment is turned off and started, use a clean cloth to wipe off the spilled glue. Clean the filter screen of the glue box of the Beijing crystal mask coating machine every half month. Cleaning the filter screen of the coating head of the Beijing crystal mask coating machine. If production has stopped for more than a month, all coating equipment should be cleaned once a day according to the above cleaning content and requirements, before and after batch changes, every half month, and irregularly before being put into use; for the glue box of the Beijing crystal mask coating machine, after emptying the original glue, add about 30 kilograms of white mineral oil to dissolve the residual glue, empty it, and then add about 30 kilograms of white mineral oil to dissolve again, and then completely empty it for backup.
Thank you all for patiently reading the article shared by the editor about the Beijing crystal mask coating machine. If you need to know more about the Beijing crystal mask coating machine and fentanyl transdermal patch coating machine, please feel free to contact us. Xinyi Huida is at your service 24 hours a day!
Related Information
Beijing XinyiHuida Electromechanical
E-mail: xinyihuida@163.com
Mobile: +86-13911770565 Mr. Lin (General Manager)
Address: 415, 4th Floor, No.2 Jinguangnan Street, Jinguangnan Street, Xilu Street, Fangshan District, Beijing
Product Category
Copyright© Beijing XinyiHuida Electromechanical Equipment Co., Ltd