The performance and application characteristics of the gel patch coating machine in Beijing.
Release time:
2020-12-04
The Beijing gel patch coating machine is gradually appearing in our lives, bringing us a different experience. The working principle of the Beijing gel patch coating machine is that the pressure-sensitive adhesive transfer coating method involves heating and dissolving the medicinal adhesive, using traditional Chinese medicine powder or Western medicine for dissolution, and placing it into the feeding hopper. It forms an upper shaft and a lower shaft, applying a constant temperature coating onto release paper, cooling it down, and then compounding it with non-woven fabric or spunlace fabric, followed by stretching.
Beijing Gel Patch Coating MachinePerformance Application Characteristics
The Beijing Gel Patch Coating Machine is gradually appearing in our lives, bringing us a different experience.
The working principle of the Beijing Gel Patch Coating Machine is that the pressure-sensitive adhesive transfer coating method involves heating and dissolving the ointment glue, using traditional Chinese medicine powder or Western medicine to dissolve, placing it in the feeding hopper, and applying it to the release paper through the formation of the upper and lower shafts at a constant temperature, cooling it, and then compounding it with non-woven fabric or water-needle fabric, followed by stretching.
Anti-stick paper and non-woven fabric hanging device: consists of a hanging bracket, optical axis, and paper stop. Adjustment: Calculate the distance between the two brackets and hang the fabric paper in the middle.
Heating device: upper shaft, lower shaft, feeding, with heating constant temperature device. Adjustment: Adjust using the up and down keys of the temperature controller.
Traction device: The traction is controlled by a 180W stepless speed-regulating motor, consisting of active drive and passive drive. Adjustment: Fix the release paper and non-woven fabric between the four traction wheels by adjusting the M8 pin, ensuring it is centered.
Coating thickness adjustment: Adjust the thickness by adjusting the M8 top thread of the upper and lower pressing shafts.
Coating width adjustment: Adjust the coating width by adjusting the discharge control panel of the feeding hopper.
At the same time, maintenance should be noted. The chain of the traction motor should be regularly lubricated with chain oil, and the temperature control should be checked regularly, along with the main traction drive and the adjustment of the driven screw jack.
The above are the performance application characteristics of the Beijing Gel Patch Coating Machine, hoping to be helpful to everyone.
Thank you all for patiently reading the article shared by the editor about the Beijing Gel Patch Coating Machine. If you need to learn about the crystal mask coating machine, please feel free to contact us. Xinyi Huida is at your service 24 hours a day!
Related Information
Beijing XinyiHuida Electromechanical
E-mail: xinyihuida@163.com
Mobile: +86-13911770565 Mr. Lin (General Manager)
Address: 415, 4th Floor, No.2 Jinguangnan Street, Jinguangnan Street, Xilu Street, Fangshan District, Beijing
Product Category
Copyright© Beijing XinyiHuida Electromechanical Equipment Co., Ltd