What preparations are needed before using a plaster coating machine?
Release time:
2021-02-25
In recent years, the plaster coating machine has provided a lot of help in our daily lives. We know that the plaster coating machine actually heats and dissolves the plaster adhesive, then mixes it with traditional Chinese medicine powder or Western medicine solution, placing it into the hopper. It forms an upper shaft and a lower shaft, applying a constant temperature coating on the anti-stick paper. After cooling, it is compounded with non-woven fabric or spunbond fabric, and then pulled. So what preparations are needed before using the plaster coating machine? Below, the editor will introduce this, hoping it can be helpful to everyone.
Preparation before using the plaster coating machine.
In recent years,the plaster coating machinehas provided a lot of help in our daily lives. We know that the plaster coating machine actually heats and dissolves the plaster glue, then dissolves it with traditional Chinese medicine powder or Western medicine, puts it into the hopper, forms the upper and lower shafts, and coats it at a constant temperature on the release paper. After cooling, it is compounded with non-woven fabric or spunbond fabric, and then pulled. So what preparations are needed before using the plaster coating machine? Below, the editor will introduce it to everyone, hoping to be helpful.
The preparations before using the plaster coating machine are as follows.
1. Hang the release paper (must be centered, with the smooth side facing up).
2. Hang the non-woven fabric (must be centered, with the wool side facing down, for easy sticking and fitting).
3. Fix the release paper and non-woven fabric between the four traction wheels, ensuring they are centered.
4. Turn on the motor to test the traction and check the traction situation.
5. Turn on the heating temperature control and check the temperature control.
6. Turn on the fan to check the cooling situation.
7. Adjust the thickness of the pressure roller according to the patch thickness.
8. Adjust the coating width.
The above operations must be performed without heating the equipment. For the second use, both sets must be temperature-controlled and preheated, and the substrate left on the pressure roller can be dissolved and softened before operation. Starting the cooling machine may cause the release paper to rupture.
Thank you all for patiently reading the article shared by the editor about the plaster coating machine. If you need to know more about the plaster coating machine and fentanyl transdermal patch coating machine, please feel free to contact us. Xinyi Huida is at your service 24 hours a day!
Related Information
Beijing XinyiHuida Electromechanical
E-mail: xinyihuida@163.com
Mobile: +86-13911770565 Mr. Lin (General Manager)
Address: 415, 4th Floor, No.2 Jinguangnan Street, Jinguangnan Street, Xilu Street, Fangshan District, Beijing
Product Category
Copyright© Beijing XinyiHuida Electromechanical Equipment Co., Ltd