1. Abrasions, bruises, and sprains. [Mechanism] Quickly eliminate inflammation, relieve pain, activate and generate the body's recovery ability, and rapidly restore damaged tissues.
11
2020/11
Currently, the automatic tracking and winding device applied to the winding machine includes a winding device with a winding roller, the frame body on the conveying side of the winding device, the horizontal height of the frame body, a sliding track that moves in that direction, and sensors near the flipping roller and winding roller that are parallel to the pressure roller. Moreover, the slider moves through a gearbox based on the information obtained from the sensors, and applications are currently being promoted to ensure winding under non-compressed conditions.
11
2020/11
What are the precautions for using a coating machine?
Set the coating working methods and related parameters (coating speed, segment length, interval length, roller speed ratio, etc.), and then turn on the compressed air (adjust the compressor box adjustment valve, with the pneumatic pressure between 0.2 and 0.3 MPa).
11
2020/11
What steps are required for the pre-treatment work of the gel patch coating machine?
There are two coating methods. One is to apply a photosensitive emulsion on the silk screen through multiple wet applications. Alternatively, a drying process is added after each coating. Machines quantitatively apply liquid (or molten) polymer materials (such as adhesives or paints) onto the surface of the material.
11
2020/11
Analysis of Common Issues in the Maintenance of Fever Patch Coating Machines
Coating - spacing between the rear roller. The speed of the application roller when the rear roller pops out, and the diameter of the rear roller. Appearance material of the hundred rollers. Deformation of the hundred rollers. The rear roller is parallel to the coating roller, while the rear roller is not parallel to the front roller of the oven. Working tension.
11
2020/11
Beijing XinyiHuida Electromechanical
E-mail: xinyihuida@163.com
Mobile: +86-13911770565 Mr. Lin (General Manager)
Address: 415, 4th Floor, No.2 Jinguangnan Street, Jinguangnan Street, Xilu Street, Fangshan District, Beijing
Product Category
Copyright© Beijing XinyiHuida Electromechanical Equipment Co., Ltd